Main Memory Configuration - CHAINTECH 9EJL4 User Manual

Chapter 2

2-3 Main Memory Configuration

This motherboard provides 2 184pin Double Data Rate (DDR) Dual Inline Memory
Modules (DIMM) slots, which supports PC 1600/PC2100/2700 DDR SDRAM
modules up to 2GB. Install at least one DIMM module on the slots. Memory
modules can be installed on the slots in any order. You can install either single- or
double-sided modules to meet your own needs.
To install your DDR Modules please follow the following steps:
1. Unlock a DIMM socket by pressing the retaining clips outward. The DDR
Modules has only one notch at the center of module. The DDR module will only
fit in the right position.
2. Insert the DDR Module vertically into the DIMM slot, with the correct alignment.
Then push it in until the golden finger on the memory module is deeply inserted
into the socket.
3. The plastic clip on each side of the DIMM slot will automatically close to hold the
DDR Modules in place.
6