Hub or Switch to Router Connection
Connect the Router to an uplink port (MDI-II) on an Ethernet hub or switch with a straight-through cable as shown in
the diagram below:
Computer to Router Connection
DSL-G624T Wireless A DSL Router User's Guide
10
If you wish to reserve the uplink
port on the switch or hub for
another device, connect to any on
the other MDI-X ports (1x, 2x, etc.)
with a crossed cable.
You
can
connect
directly to a 10/100BASE-TX
Ethernet
adapter
installed on a PC using the Ethernet
cable provided as shown in this
diagram.
the Router
card
(NIC)