Multiple-Adapter Installation; Multiple Cards In A Pnp System - D-Link PC DE-220P Installation Manual

- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

Multiple-Adapter Installation

Multiple DE-220P Series cards may be installed in
a computer to provide for multiple addresses, or in
the case of a server, to provide for network seg-
mentation.

Multiple Cards in a PnP System

No special attention
multiple DE-220P Series cards in a PnP-compliant
system (so long as Plug and Play is enabled). In-
stall the several cards into their expansion slots,
following the four steps set, out in the "Single-
Adapter Installation" section
steps 2 and 3 for each card). When computer
power is switched
matically
configuration settings for the several cards.
3 Pl ug and Play functionality of the NOS may be toggled between
enable and disable by a selection in your setup.exe run.
I n s t a l l a t i o n
DE-22OP Series Ethernet Adapter / User's Guide
is needed when installing
on, the PnP system will auto-
coordinated
select
above (repeating
(conflict,-free)
2 - 9