Unwanted Tools And The Environment; Maintenance - DeWalt D25112(K) Operating Instructions Manual

E N G L I S H
• Insert the appropriate screwdriver bit.
When driving slotted head screws always use
bits with a finder sleeve.
• Gently press the variable speed switch (1) to
prevent damage to the screw head. In reverse
(LH) rotation the tool speed is automatically
reduced for easy screw removal.
• When the screw is flush with the workpiece,
release the variable speed switch to prevent the
screw head from penetrating into the workpiece.
D25113K/D25114K/D25213K - Chipping and
chiselling (fig. A)
• Set the mode selector switch (4) to the
"hammering only" position.
• Insert the appropriate chisel and rotate it by hand
to lock it into one of 51 positions.
• Adjust the side handle (9) as required.
• Switch on the tool and start working.
• Always switch off the tool when work is finished
and before unplugging.
• Do not use this tool to mix or pump
easily combustible or explosive fluids
(benzine, alcohol, etc.).
• Do not mix or stir inflammable liquids
labelled accordingly.
Various types of SDS-plus
available as an option.
Consult your dealer for further information on the
appropriate accessories.

Maintenance

Your D WALT power tool has been designed to
E
operate over a long period of time with a minimum
of maintenance. Continuous satisfactory operation
depends upon proper tool care and regular cleaning.
• This machine is not user-serviceable. Take the
tool to an authorised D
approximately 40 hours of use. If problems occur
before this time contact an authorised D
repair agent.
• The tool will automatically switch off when the
carbon brushes are worn.
12
®
drill bits and chisels are
WALT repair agent after
E
WALT
E
Lubrication
Your power tool requires no additional lubrication.
Accessories and attachments used must be
regularly lubricated around the SDS-plus
Cleaning
Keep the ventilation slots clear and regularly clean
the housing with a soft cloth.

Unwanted tools and the environment

Take your tool to an authorized D
agent where it will be disposed of in an
environmentally safe way.
®
fitment.
WALT repair
E