Page 6
E N G L I S H HEAVY DUTY ROTARY HAMMER DRILL D25102(K)/D25103K/D25104K/D25203K Congratulations! You have chosen a D WALT tool. Years of experience, thorough product development and innovation make WALT one of the most reliable partners for professional power tool users.
Page 8
Take the time to thoroughly read and understand this manual prior to operation. Your heavy duty rotary hammer drill D25102(K)/ D25103K/D25104K/D25203K has been designed for professional rotary and hammer drilling, screwdriving and light chipping, chiselling, demolition applications and for carbide tipped core drilling.
Page 9
Twist the chisel until it locks in position. Selecting the operating mode (fig. B1 & B2) ® Inserting and removing SDS-plus accessories D25102(K) (fig. B1) (fig. C) This tool uses SDS-plus ® accessories (refer to the The tool can be used in the following operating modes: ®...
Page 10
Forward/reverse slider (fig. F1 & F2) pull the dust cover (7) off. • Fit the new dust cover. D25102(K)/D25103K/D25104K (fig. F1) • Release the tool holder locking sleeve. • Push the forward/reverse slider (3) to the RH-side for forward (RH) rotation. See arrows on tool.
Page 11
Switching on and off (fig. A) • When drilling through a structure thicker than the depth of the core bit, break away the round D25102(K)/D25103K/D25104K cylinder of concrete or core inside the bit at • To run the tool, press the variable speed switch regular intervals.
Page 12
E N G L I S H • Insert the appropriate screwdriver bit. When driving slotted head screws always use bits with a finder sleeve. Lubrication • Gently press the variable speed switch (1) to Your power tool requires no additional lubrication. prevent damage to the screw head.