When Using A Subwoofer Without Using The Optional Amplifier - Pioneer DEH-P5200HD Operation Manual

Connecting the unit

When using a subwoofer without using the optional amplifier

Pioneer IP-BUS
accessories
Yellow
Connect to the constant 12 V supply terminal.
Red
Connect to terminal controlled by ignition switch (12 V DC).
Black (chassis ground)
Connect to a clean, paint-free metal location.
Note
Change the initial setting of this unit.
The subwoofer output of this unit is monaural.
English
This product
Fuse (10 A)
Antenna jack
IP-BUS input (Blue)
IP-BUS cable
Connecting the unit
Rear output or subwoofer output
Front output
Wired remote input
Hard-wired remote control
adaptor can be connected
(sold separately).
Front speaker
Left
Subwoofer (4 )
Not used.
Blue/white
Connect to system control
terminal of the power amp or
auto-antenna relay control
terminal (max. 300 mA 12 V DC).
White Gray
White/black Gray/black
Green Violet
Green/black Violet/black
When using a subwoofer of 70 W (2 ), be sure to connect
with Violet and Violet/black leads of this unit.
Do not connect anything with Green and Green/black leads.
Green Violet
Green/black Violet/black
English
Front speaker
Right
Subwoofer (4 )
Subwoofer
(4 ) 2