3
Setting Up the Monitor
To set up the monitor, ensure that the power is turned off to the monitor, computer system, and other
attached devices, then follow the instructions below.
Identifying Rear Connectors
Figure 3-1
Connector
1
AC Power
2
USB
3
Serial
4
VGA
NOTE:
A +12VDC input jack is available on the connector panel of the L5009tm monitor. This jack
accepts an external DC power brick (not included with the monitor).
ENWW
Rear Connectors
Function
Connects the AC power cord to the monitor.
Connects the touchscreen USB cable to the monitor.
Connects the touchscreen serial cable to the monitor (not
available on L5009tm model).
Connects the VGA video cable to the monitor.
Identifying Rear Connectors
5