Before Setting Up To The Telephone; Setting Telephone Compatibility And Transmit Adjustments; Step 1: Setting Telephone Compatibility - Black Box HS300A User Manual

2.4 GHZ WIRELESS REMOTE UNIT WITH HOOKSWITCH 2.4 GHZ WIRELESS REMOTE UNIT WITH HOOKSWITCH

3.4 Before Setting Up to the Telephone

1. Make sure the
headset/handset selector
marked with the 30 icon
on top of the base is in the
headset position. The
selector is in the headset
position when the on-line
indicator (marked with the
4 icon) on the front of the
base lights up and the on-
line indicator on the top of
the remote is flashing. If the
lights are off, the selector is
in the handset position.
Press the handset/headset
selector once to activate the
headset (Figure 3-6).
14
Figure 3-6. Activating the Headset.
2. Make sure the mute
function on the remote is
off. If the mute button is on,
you will hear a double beep
in your headset every 5
seconds. Turn it off by
pressing the mute button on
the remote marked with the
6 icon once.
3. If your telephone has
volume control, set the
volume to mid-range.
Control the headset volume
through the remote.
3.5 Setting Telephone Compatibility
and Transmit Adjustments
3.5.1 S 1: S T
TEP ETTING ELEPHONE
C
OMPATIBILITY
1. Put your headset on, lift the
handset from the telephone,
and listen for a dial tone in
your headset.
2. If there is no dial tone,
adjust the telephone
compatibility switch marked
A-G on the rear of the base.
Move from A to G until the
dial tone is clear. If the dial
tone is just as clear in
position A as in G, leave the
switch in position A. Most
phones will use position A
or position G (Figure 3-7).