Volvo V60 PLUG-IN HYBRID Owner's Manual page 374

10 Maintenance and service
||
Move the battery aside.
Lift it up.
Fitting
10
1. Lower the battery into the battery box.
2. Move the battery inward and to the side
until it reaches the rear edge of the box.
3. Tighten the clamp that holds the battery.
4. Connect the ventilation hose.
> Check that it is correctly connected to
both battery and outlet in the body.
5. Connect the red positive cable.
6. Connect the black negative cable.
7. Press in the rear cover. (See earlier sec-
tion "Removal".)
8. Fit the rubber moulding. (See "Removal".)
9. Align the front cover and secure it with
the clips. (See "Removal".)
372
For more information on the car's starter bat-
tery, see Jump starting with battery (p. 263).
Hybrid battery
The car is equipped with a hybrid battery for
electric motor operation - a maintenance-free
rechargeable Lithium-ion type battery.
WARNING
The hybrid battery must only be replaced
by a workshop - an authorised Volvo work-
shop is recommended.
Coolant
The hybrid battery's cooling system has a
separate expansion tank.
IMPORTANT
The hybrid battery's coolant must only be
topped up by a workshop - an authorised
Volvo workshop is recommended.