Volvo V60 PLUG-IN HYBRID Owner's Manual page 275

The manual gear position is reached
by moving the lever to the side from
position D to the end position at
"+S-". The combined instrument
panel's symbol "+S-" changes colour from
WHITE to ORANGE and the digits
are displayed in a box, corresponding to the
gear that has just been selected.
•
Move the lever forwards towards "+"
(plus) to change up a gear and release the
lever, which returns to its rest position
between + and –.
or
•
Pull the lever back towards "–" (minus) to
change down a gear and release it.
The manual gearshift mode "+S–" can be
selected at any time while driving.
Geartronic automatically shifts down if the
driver allows the speed to decrease lower
than a level suitable for the selected gear, in
order to avoid jerking and stalling.
To return to automatic driving mode:
•
Move the lever to the side to the end
position at D.
Geartronic - Winter mode
It can be easier to pull away on slippery roads
if 3rd gear is engaged manually.
1. Depress the brake pedal and move the
gear selector from D position to the end
position at "+S–" - the combined instru-
ment panel changes indication from
the figure 1
2. Scroll up to gear 3 by pushing the lever
forward towards "+" (plus) twice - the dis-
play shifts the indication from
1 , 2 , 3 etc.
3. Release the brake and accelerate care-
fully.
The gearbox "winter mode" means that the
car moves off with a lower engine speed and
reduced engine power on the drive wheels.
Kick-down
When the accelerator pedal is pressed all the
way to the floor (beyond the position normally
regarded as full acceleration) a lower gear is
immediately engaged. This is known as kick-
down.
If the accelerator is released from the kick-
down position, the gearbox automatically
changes up.
Kick-down is used when maximum accelera-
tion is needed, such as for overtaking.
Safety function
To prevent overrevving the engine, the gear-
box control program has a protective down-
shift inhibitor which prevents the kick-down
function.
Geartronic does not permit downshifting/
kick-down which would result in an engine
speed high enough to damage the engine.
Nothing happens if the driver still tries to shift
D to
.
1 3
to .
08 Starting and driving
down in this way at high engine speed – the
original gear remains engaged.
When kick-down is activated the car can
change one or more gears at a time depend-
ing on engine speed. The car changes up
when the engine reaches its maximum speed
in order to prevent damage to the engine.
Towing
If the car has to be towed - see important
information in the section Towing (p. 312).
Related information
•
Transmission fluid - grade and volume
(p. 406)
•
Gearboxes (p. 271)
08
273