Table of Contents
Advertisement
Car audio and car goods internet store Winauto
Adjusting the speaker volume
You can adjust the volume level of each
connected speaker.
The adjustable speakers are "Front R" (Front
Right), "Front L" (Front Left), "Surround L"
(Rear Left), "Surround R" (Rear Right) and
"Subwoofer*."
* Adjustable only when a subwoofer is connected and
"Subwoofer" is set to "ON" (page 41).
1
While no source is selected, touch
"Source List," then
2
Touch "Sound."
The sound setting menu appears.
3
Touch v/V to scroll, then touch "4.1ch
Speaker Level."
The setting display appears.
Back
ATT
4.1ch Speaker Level
Front L
Front R
Surround L
Surround R
Subwoofer
Reset
4
Touch the speaker, then +/– to adjust
the level.
Repeat this step to adjust each speaker's
volume.
To restore the default setting, touch "Reset."
To return to the previous display, touch "Back."
.
Top
0
Monitor Adjustment
Adjusting the monitor angle
You can adjust the monitor angle for best
viewing.
1
Touch "Source List," then
2
Touch "General."
The general setting menu appears.
3
Touch v/V to scroll, then touch
"Monitor Angle."
The setting display appears.
4
Touch
/
to adjust the angle.
The adjustment is stored.
The monitor retains the angle even after the
front panel is opened and closed.
To return to the previous display, touch "Back."
Touch panel calibration
Touch panel calibration is required if the
touching position does not correspond with the
proper item.
1
Touch "Source List," then
2
Touch "General."
The general setting menu appears.
3
Touch v/V to scroll, then touch "Touch
Panel Adjust."
The setting display appears.
4
Touch the targets in sequence.
The calibration is complete.
To cancel calibration, touch "Cancel."
.
.
35
Advertisement
Table of Contents
