Drill Master 92383 Operating Instructions Manual page 7

is in its "OFF" position, the Battery Pack (27) is removed from the Cordless Drill,
and the Charger (41) is unplugged from its electrical outlet prior to making any
adjustments to the tool. (See Figure A below, and Figure B, next page.)
Chuck (7): Accepts up to 3/8" shank diameter Drill Bits (not included). To install
2.
a Drill Bit, with the Cordless Drill pointed away from your body, hold the Chuck
Sleeve firmly in place and turn the Chuck clockwise . Insert the shank of a Drill
Bit all the way into the Chuck. While holding the Chuck Sleeve in place, turn the
Chuck counterclockwise to lock the Drill Bit in place. (See Figure A.)
3. Power Switch (20): The Power Switch is operated manually simply by squeezing
the Power Switch to turn on the Cordless Drill and releasing pressure on the Power
Switch to turn off the Cordless Drill. (See Figure A.)
4. Forward/Lock/Reverse Lever: The Forward/Lock/Reverse Lever allows you to
change the rotational direction of the Cordless Drill and also to lock the Power
Switch (20) in its "OFF" position. To change the rotational direction, make sure
the Cordless Drill is at a complete stop. While holding the Cordless Drill in your
hand, move the Lever to the left for a clockwise rotation. For a counterclockwise
rotation, move the Lever to the right . To lock the Power Switch in its "OFF" position,
move the Lever midway between the left and right settings. (See Figure A.)
CHUCK SLEEVE
CHUCK
(7)
FORWARD/LOCK/REVERSE
SWITCH
FIGURE A
SKU 92383 For technical questions, please call 1-800-444-3353
POWER SWITCH
(20)
BATTERY PACK
(27)
LEFT & RIGHT HEAD GRIPS
(5, 13)
AIR VENT
LEFT & RIGHT GRIPS
(4, 21)
CARRYING STRAP
(39)
PAGE 7