Table of Contents
Advertisement
Quick Links
Angle Drill Guide
95622
ASSEMBLY AND OPERATING INSTRUCTIONS
Glove and Drill shown in photo not included
Due to continuing improvements, actual product may differ slightly from the product described herein.
3491 Mission Oaks Blvd., Camarillo, CA 93011
Visit our Web site at http://www.harborfreight.com
To prevent serious injury, read and understand all warnings and instructions before use.
®
Copyright © 2007 by Harbor Freight Tools
. All rights reserved. No portion of this
manual or any artwork contained herein may be reproduced in any shape or form
without the express written consent of Harbor Freight Tools.
For technical questions and replacement parts, please call 1-800-444-3353
Advertisement
Table of Contents
Related Manuals for Drill Master 95622
Summary of Contents for Drill Master 95622
- Page 1 . All rights reserved. No portion of this manual or any artwork contained herein may be reproduced in any shape or form without the express written consent of Harbor Freight Tools. For technical questions and replacement parts, please call 1-800-444-3353...
-
Page 2: Specifications
Dress properly. Do not wear loose clothing or jewelry as they can be caught in moving parts. Protective, electrically non-conductive clothes and non-skid footwear are recommended when working. Wear restrictive hair covering to contain long hair. For technical questions please call 1-800-444-3353 Page 2 SKU 95622... - Page 3 Use of any other parts will void the warranty. Only use accessories intended for use with this tool. Approved accessories are available from Harbor Freight Tools. 15. Do not operate tool if under the influence of alcohol or drugs. Read warning labels on prescriptions to determine if your judgment or reflexes are impaired while taking drugs.
- Page 4 NOTE: Drill shown in photo at right is not included. If any parts are missing or broken, please call Harbor Freight Tools at the number on the cover of this manual. For technical questions please call 1-800-444-3353 Page 4 SKU 95622...
-
Page 5: Operation
Retract the Anchoring Pins by pulling up on the pin heads. Drilling a hole at an angle Remove the Drill Guide from the work material. For technical questions please call 1-800-444-3353 Page 5 SKU 95622... - Page 6 Operate drill as desired. The Chuck Frame will not slide along the Guide Rods (2). The Frame Stopper is also useful when the tool is being transported to prevent the Chuck Frame from sliding in an uncontrolled fashion along the Guide Rods. For technical questions please call 1-800-444-3353 Page 6 SKU 95622...
-
Page 7: Maintenance
If the tool gets covered with sawdust, metal filings or shavings from drilling, brush the tool clean and apply light oil before storage. Store the tool in a clean dry place to prevent rust damage. For technical questions please call 1-800-444-3353 Page 7 SKU 95622... -
Page 8: Assembly Diagram And Parts List
SUMES ALL RISK AND LIABILITY ARISING OUT OF HIS OR HER REPAIRS TO THE ORIGI- NAL PRODUCT OR REPLACEMENT PARTS THERETO, OR ARISING OUT OF HIS OR HER INSTALLATION OF REPLACEMENT PARTS THERETO. For technical questions please call 1-800-444-3353 Page 8 SKU 95622...