SonicWALL TZ 170 Getting Started Manual page 11

If the SonicWALL Setup Wizard Does Not Appear
If you cannot connect to the SonicWALL TZ 170 Wireless appliance or the Setup
Wizard does not display, verify the following configurations:
• Did you correctly enter the SonicWALL TZ 170 Wireless management IP
address, 192.168.168.168, in your Web browser?
• Is your computer running pop-up blocking software?
• Are the Local Area Connection settings on your computer set to obtain an IP
address dynamically (DHCP) or set to a static IP of 192.168.168.20? See
"Configuring Computers for Your Network with DHCP" on page 28 for
instructions on changing your Local Area Connection settings.
• Do you have the Ethernet cable connected to your computer and to one of the
LAN ports (1 through 5) on your SonicWALL TZ 170 Wireless?
• Some browsers may not launch the Setup Wizard automatically. In this case,
log into SonicWALL TZ 170 Wireless using "admin" as the user name and
"password" as the password. After you log in, click the Wizards button on the
System > Status page. Select Setup to begin configuring your
SonicWALL TZ 170 Wireless.
• Some pop-up blockers may prevent the launch of the setup wizard. You can
temporarily disable your popup blocker, or add the management IP address of
your SonicWALL (192.168.168.168 by default) to your popup blocker's allow list.
Page 10