SonicWALL TZ 170 Getting Started Manual page 17

8. WLAN 802.11b/g Settings - The WLAN 802.11b/g Settings screen allows you to
configure your wireless network settings.
SSID
Radio Mode
Country Code
Channel
Click Next.
9. WiFiSec VPN Client User Authentication - WiFiSec is a SonicWALL wireless
security implementation that uses an IPSec VPN to secure wireless network
connections. The WiFiSec screen allows you to create a VPN user for your wireless
network.
User Name
Password
Confirm Password
Note:
You can add additional users in the SonicWALL security appliance's
Management Interface. Refer to the SonicOS Standard Administrator's Guide for
instructions on adding users.
Click Next.
Page 16
For security reasons, change this setting. Enter a unique name to
identify the wireless connection. The SSID can contain up to
32 numbers and letters.
Select the transmission standard to use. The default, Mixed,
works for most office and home settings.
Select the country where you are deploying this SonicWALL
security appliance. This configures the channels used to comply
with regulations in your country.
Select the broadcast channel you want the SonicWALL security
appliance to use. The default, AutoChannel automatically
detects the channel with the least interference.
See "SonicWALL TZ 170 Wireless Security Appliance
Regulatory Statement and Safety Instructions" on page 34 for
information on authorized channels.
Enter a user name for the VPN user.
Enter a unique password for the user.
Re-enter the password.