Table of Contents
Advertisement
SETTINGS
CUSTOMIZING YOUR PHONE
code, time and date, dialing mode, turning off the message waiting).
You may need to set up the LCD contrast level, language, area code, time and date, and
dialing mode for your telephone when you power your phone for the first time or when you
move to an area that has a different area code. Area code setting is necessary because
the phone must distinguish local or long distance calls to properly dial calls from the Caller
ID list.
You can set each item by following steps.
1. Press the MENU button to enter the setup menu.
2. Press the UP or DOWN button to select the item you want to set.
3. Press the MENU button to confirm and then press the UP or DOWN button to adjust the
options.
4. Press the MENU button to confirm and go to the next item.
5. Press the DELETE button to get to the normal standby mode.
For example:
Setting the LCD contrast level:
1. Press the MENU button, "LCD CONTRAST" shows in the display.
2. Press the MENU button again to start to set the LCD contrast level.
3. Press the UP or DOWN button to adjust the LCD contrast level.
4. Press the DELETE button to confirm and return to the normal
standby mode or press the MENU button to confirm and go to
the next setup item.
Setting the language:
1. Press the MENU button, "LCD CONTRAST" shows in the display.
2. Press the UP button to locate "SET LANGUAGE".
3. Press the MENU button again to start to set the language. This
phone supports three languages: English, Spanish, and French.
4. Press the UP or DOWN button to select your desired language.
5. Press the DELETE button to confirm and return to the normal
standby mode or press the MENU button to confirm and go to
the next setup item.
Setting your area code (example: 718):
1. Press the MENU button, "LCD CONTRAST" shows in the display.
2. Press the UP button to locate "SET AREA CODE".
3. Press the MENU button again, the first digit is flashing.
4. Press the UP or DOWN button to adjust the digit.
5. Repeat steps 3 and 4 to set the 2nd and 3rd digits of your area
code.
6. Press the DELETE button to confirm
and return to the normal standby mode
or press the MENU button to confirm
and go to the next setup item.
IB-PH568-WM-E-040506(RTT).pmd
(Setting up LCD contrast, language, area
7 1 8
SET AREA CODE
9
11
SET AREA CODE
7 1 O
SET AREA CODE
IB-PH568-WM-E-040506
7/4/2006, 4:28 PM
LCD CONTRAST
1 2 3 4 5
LCD CONTRAST
SET LANGUAGE
E S F
SET LANGUAGE
O O O
SET AREA CODE
7 O O
SET AREA CODE
Advertisement
Table of Contents
