Advertisement
KNOW YOUR TOASTER
BEFORE FIRST USE
As there may be manufacturing residue on the toaster or heating element, it may emit
an odour upon first use. This is normal and will not occur after several times use.
Before toasting your first slice of bread, it is strongly recommended that you operate
the appliance following the instructions below, but without bread.
USING YOUR TOASTER
1. Put a bread slice into the bread slot, or you can insert two slices of bread at once.
Only regular sized sliced bread can be placed into the slot.
2. Plug the power cord into the outlet.
3. Set the colour knob of the toaster to your desired colour. There are 7 positions, with
the lowest being white and the highest being extremely dark. Bread will be toasted to
a golden brown at the "4" position.
4.
Press the carriage handle down until it is positioned in place. The CANCEL
indicator will be illuminated and the toasting will begin. Once the toast has been
toasted to the set level, the carriage handle will automatically spring up. You can then
manually lift the handle slightly higher to assist in the removal of the toast.
Note: The carriage handle will not latch down if the toaster is not connected to a
power source.
5.During the toasting process, if the bread is toasted to your preference or if it starts to
over cook, you can press the CANCEL button to end the toasting process.
Advertisement
