Open The Terminal Cover (Sd Card Cover) - JVC Everio GZ-R10 Basic User's Manual

Hd memory camera
Hide thumbs Also See for Everio GZ-R10:
Table of Contents

Advertisement

Available languages

Available languages

Open the terminal cover (SD card cover)

A Open the LCD monitor.
B Slide down the terminal cover
lock and slide the cover aside
C Lift the cover slowly.
o To close
Leave the LCD monitor open first.
A Flip down the cover slowly while making sure the gray waterproof seal fits into
the opening at the terminals.
B Press the entire cover against the camcorder with equal force and firmly attach
the cover completely.
C Slide the cover until it clicks into place.
(The cover is not properly closed if the red mark at the terminal cover lock is
visible.)
CAUTION
Do not apply excessive force when opening or closing the terminal cover.
0
Do not open or close the terminal cover with wet or dirt/sand-covered hands.
0
Do not allow any dirt, lint, hair, sand, and other foreign substances to
0
accumulate between the waterproof seal and the case.
Never damage or scratch the waterproof seal and terminal cover. Doing so
0
can result in leaks. If the seal is damaged, contact your nearest JVC Service
Center for a replacement. (Charges apply.)
Read the "Detailed User Guide" carefully before using the camcorder under
0
water or in places exposed to water droplet.
Not properly closed if the red mark is visible!
(Rear)
EN
7

Advertisement

Table of Contents
loading

This manual is also suitable for:

Everio gz-r450Everio gz-r320Everio gz-r10u

Table of Contents