Inserting An Sd Card - JVC Everio GZ-R10 Basic User's Manual

Inserting an SD Card

Insert a commercially available SD card before recording.
Open the terminal cover.
(Rear)
Before inserting the SD card,
*
close the LCD monitor to turn off
this unit.
o To remove the SD card
Push the SD card inward once, then pull it out straight.
NOTE
Operations are confirmed on the following SD cards.
Manufacturer
Video A
Still Image B
Using SD cards (including SDHC/SDXC cards) other than those specified
0
above may result in recording failure or data loss.
This unit is not guaranteed to operate with all SD cards, even when using the
0
ones specified above. Some SD cards may not work due to specification
changes, etc.
To protect the data, do not touch the terminals of the SD card.
0
When using an SDXC card, check its compatibility with the OS of your
0
computer by referring to the Detailed User Guide.
Do not use a miniSD card or microSD card (even if the card is inserted in an
0
adapter). It may cause malfunction to the camcorder.
Panasonic, TOSHIBA, SanDisk
Class 4 or higher compatible SD card (2 GB)/
Class 4 or higher compatible SDHC card (4 GB to 32 GB)/
Class 4 or higher compatible SDXC card (64 GB to 128 GB)
When recording with video quality [UXP], Class 6 or
0
higher is recommended.
SD card (256 MB to 2 GB) / SDHC card (4 GB to 32 GB) /
SDXC card (64 GB to 128 GB)
Insert an SD card.
Label
EN
9