HP Vectra XW Familiarization Manual page 6

Platform
HP Vectra XW 6/xxx
HP Vectra XW 6/xxx Series U1
HP Vectra XW 6/xxx Series W1
Online Help and Online
Diagnostics
OpenGL Drivers
OpenGL Drivers
Every operating system and applications program needs specific drivers.
Without these, the HP Integrated OpenGL Interface Board operates only in
standard VGA mode, and hardware 3D acceleration will not be usable.
The OpenGL interface drivers for Windows NT 3.51 must be installed, from the HP Vectra XW/XU Drivers and
Documentation CD-ROM, when the operating system is installed.
The Windows NT 4.0 WS operating system is preloaded, and the OpenGL drivers are preloaded with it.
Online help for installing and configuring the drivers is found by running
\opengl\doc\hpopengl.hp
Documentation CD-ROM, or from the hard disk on models in which the
operating system is preloaded.
There is no specific diagnostic tool. However, for the HP Vectra XW 6/xxx
and HP Vectra XW 6/xxx Series U1, the configuration can be checked on
the AccelPanel. This is recommended as the first step in any trouble-
shooting. This panel is normally placed in the AccelGraphics Group, though
the user may have chosen to install it somewhere else.
4
Operating System and Drivers
on the HP Vectra XW/XU Drivers and