Use; Charging Your Headset - ReSound Azure User Manual

Use

Charging your Headset

Important: Before setting up your headset be sure that all parts have
been above room temperature 32 ºF/0ºC for at least 30 minutes
Note! The headset has its own built-in battery, and does not use the bat-
tery of the hearing instrument.
Make sure thatyour headset is fully charged before you start using it.
The first full charge takes approximately 2 hours.
You have three options for charging the headset.
1. Using the AC adaptor to charge directly
from a wall power socket
a. The headset should be disconnected from the
hearing instrument.
b. Connect your AC power adaptor to the wall power
socket and to the charging socket on the headset
important:
In case the headset is left unused for a longer period of time,
it needs to be recharged. We advice you to recharge the headset at
least every 6 months! Otherwise the internal battery of the headset will
decompose and the headset will cease to function. ReSound does not
accept any responsibility for problems resulting from failure to comply
with the recharge guidelines
6
2. Charging from your resound charger
(only included in some countries)
a. The headset should be disconnected
from the hearing instrument.
b. Connect the charger to the power supply
with the AC power adaptor included with
the charger
c. Connect the USB end of the USB/PC cable to the USB socket
on the charger. Connect the other end of the PC/USB cable to
the charging socket on the headset
3. Charging from a PC with UsB interface
a. The headset should be disconnected from the
hearing instrument.
b. Connect the USB end of the USB/PC cable to the
USB socket on the PC. Connect the other end of the
PC/USB cable to the charging socket on the headset
Color indicators:
When the LED is steady yellow/light green, your headset is charging.
When the LED is green, it is fully charged. If the headset has not
been charged for a very long time, the headset will need a bit of
charging before constant yellow light turns on.
7