Use; Charging Your Headset - ReSound AZ60-DI User Manual

Page 5

Use

Charging your Headset

Important: Before setting up your headset, be sure all parts have been above room temperature 32 ºF/0ºC
for at least 30 minutes
Note! The headset has its own built-in battery and does not use the battery of the hearing instrument.
Make sure your headset is fully charged before you start using it. The first full charge takes approximately
2 hours. You have three options for charging the headset.
1. Using the AC adaptor to charge directly from a wall power socket
a. The headset should be disconnected from the hearing instrument.
b. Connect your AC power adaptor to the wall power socket and to the charging socket on the
headset
2. Charging from your ReSound charger (only included in some countries)
a. The headset should be disconnected from the hearing instrument.
b. Connect the charger to the power supply with the AC power adaptor included with the
charger
c. Connect the USB end of the USB/PC cable to the USB socket on the charger. Connect the
other end of the PC/USB cable to the charging socket on the headset
3. Charging from a PC with USB interface
a. The headset should be disconnected from the hearing instrument.
b. Connect the USB end of the USB/PC cable to the USB socket on the PC. Connect the other
end of the PC/USB cable to the charging socket on the headset
Color Indicators: When the LED is steady yellow, your headset is charging. When the LED is green, it is
fully charged. If the headset has not been charged for a very long time, the headset will need a bit of
charging before the solid yellow light turns on.
Important: If the headset has not been used for 6 months or more, it needs to be re-charged.
2
1
3