Turning The Headset On And Off - ReSound Azure User Manual

if you have problems:
• The headset is in pairing mode for two minutes. If it turns off after
one minute, and if you did not finish the pairing process, you need to
go back to step 2.
• If pairing is unsuccessful for some other reason, repeat the steps
above.
Note: If you accidentally put the headset into pairing mode, tap the
pairing button to exit pairing mode. Also note that the headset will
automatically turn itself off 10 seconds after being paired with either
a phone and/or the hearing instrument. Once the headset is discon-
nected from the hearing instruments or if the hearing instruments are
turned off the headset is no longer active/ON.
important: The same headset can be paired with multiple phones.
10

Turning the Headset On and Off

1. Connect the hearing instrument to the headset.
Initially, it will be most easy to connect the
two devices before the hearing instrument
is placed on the ear. With some training it is
possible to connect the headset while
wearing the hearing instrument
2. The headset emits 4 quick blue flashes and is
now turned on. The headset will continuously
emit slow blue flashes indicating it is active
3. To turn off the headset, remove it from the
hearing instrument. The headset emits
4 fast blue flashes and turns off
For optimal performance, the ReSound headset
and your cellular phone should be worn on the same
side of your body. In general, you will get better performance when
there are no obstructions between your headset and your cellular
phone.
11