Generac Power Systems 005818-0 Features & Specifications page 4

EcoGen™ - 6 kW
Model #
5819
4 of 4
5839
W2
5703
H1
6004
H2
6016
W1
TRANSFER
SWITCH
8KW - 17KW
(IF SUPPLIED)
Design and specifications subject to change without notice. Dimensions shown are approximate. Contact your Generac dealer for certified drawings. DO NOT USE THESE DIMENSIONS FOR INSTALLATION PURPOSES.
731.9
[28.8]
LEFT SIDE VIEW
Product Discription
Every standby generator requires a battery to start the system. Generac offers the
26R Wet Cell Battery
recommended 26R wet cell battery for use with all air-cooled standby product.
The fascia base wrap snaps together around the bottom the new air-cooled
Fascia Base Wrap Kit generators. This offers a sleek, contoured appearance as well as offering protection
from rodents and insects by covering the lifting holes located in the base.
Paint Kit Bisque Kit
H2
Generac's scheduled maintenance kits provide all the hardware necessary to
Scheduled Maintenance Kit
perform complete routine maintenance on a Generac automatic standby generator.
H1
As off-grid energy systems continue to grow in size and capacity, it is becoming
more common to have a 240V instead of 120V only. This conversion kit allows
240V Conversion Kit
the EcoGen to be converted easily from a 120V system to a 240V system and still
maintain a full 6kW output.
TRANSFER
SWITCH
(IF SUPPLIED)
637.6
[25.1]
642
[25.3]
®
Generac Power Systems, Inc. • S45 W29290 HWY. 59, Waukesha, WI 53189 • generac.com
©2012 Generac Power Systems, Inc. All rights reserved. All specifications are subject to change without notice. Bulletin 0182260SBY-L Printed in U.S.A. 11/06/12
W1
W2
20KW
76.2 [3.0]
PEA GRAVEL
MINIMUM
available accessories
1218
[47.9]
E c o G e n S e r i e s
1226
[48.3]
FRONT VIEW
®
dimensions