System Specifications - HP ProLiant DL160 Quickspecs

QuickSpecs

System Specifications

Power
ProLiant DL160 G5 Fully Configured
Fully Loaded System Input Wattage (W)
Fully Loaded System Input Current (A rms)
Fully Loaded System Thermal (BTU- Hr)
Fully Loaded System VA (Volt-Amp)
System Leakage with all power supplies
loaded (mA)
System Inrush Current with all power
supplies loaded (A)
Power cord requirements
NOTE: Power shown is for a fully configured system consisting of (2) CPU, (8) double-sided DIMMs, (2) HDDs, (1) CD-
ROM, and (2) PCI cards.
Power Cord
Server Power Cords One 6' Highline (IEC-IEC) power cord ships standard
NOTE: HP ProLiant DL servers no longer ship standard with NEMA power cords (163719-002)
that allow connection to 110V US wall outlets in a home or office. ProLiant DL servers are
primarily connected to PDU's in data center racks so they now ship standard with only a PDU
power cord (416151-B21). If a user wishes to power a ProLiant DL server using a 110V receptacle
(NEMA-15), the NEMA power cord (227099-001) must be ordered separately.
If customers require a local power cord, they can check the power cord matrix for the appropriate
cord. Please see the following power cord matrix: http://www.hp.com/go/powercordmatrix.
DA - 12902 Worldwide QuickSpecs — Version 19 — 1/26/2009
115V/60Hz
651
5.7
2218
657
1.58
19
Nema 5-15P to IEC320-C13
HP ProLiant DL160 Generation 5
220V/50Hz
638
3.0
2174
657
3.03
37
IEC320-C13 to IEC320-C14
AF556A
Page 36