THOMSON ST2020 User Manual page 15

VoIP Business Phone User Manual
[HOLD]
Press this key to put the current call on hold. When a call is held, the "HOLDING:"
message is displayed on the LCD screen. Press the key again to retrieve the call.
This key is also used to switch between simultaneous calls (broker call).
[MULTILINE]
Press this key to switch directly between two lines.
[MSG]
Press this key to access to the Voice Mail System.
[PBOOK]
Press this key to enter the Phone book.
Copyright ©2005 THOMSON All rights reserved.
- Page 15 -