Monitor Out - BenQ MX600 User Manual

Function
Baud Rate
Test Pattern
Closed
Caption
Standby
Settings
Reset All
Settings
46 Operation
Selects a baud rate that is identical with your computer's so that you
can connect the projector using a suitable RS-232 cable and update or
download the projector's firmware. This function is intended for
qualified service personnel.
See "Using the test pattern" on page 34
Closed Caption Enable
Activates the function by selecting On when the selected input signal
carries closed captions.
• Captions: An on-screen display of the dialogue, narration, and
sound effects of TV programs and videos that are closed captioned
(usually marked as "CC" in TV listings).
Caption Version
Selects a preferred closed captioning mode. To view captions, select
CC1, CC2, CC3, or CC4 (CC1 displays captions in the primary
language in your area).

Monitor Out

Selecting On enables the function. The projector can output a VGA
signal when it is in standby mode and the COMPUTER 1 jack is
correctly connected to devices. See
to make the connection.
Audio Pass Through
The projector can play sound when it is in standby mode and the
corresponding jacks are correctly connected to devices. Press
choose the source that you wish to use. See
for how to make the connection.
Enabling this function slightly increases the standby power consumption.
MHL Charging
Selecting On enables the function. The projector will automatically
charge the connected MHL compatible smart device as long as the
power is fed to the projector.
Returns all settings to the factory preset values.
The following settings will still remain: Keystone, User 1, User 2, Color
Space Conversion, Language, Projector Installation, High Altitude
Mode, Security Settings and Baud Rate.
Description
for details.
"Connection" on page 16
"Connection" on page 16
for how
/ to