Connecting To An External Memory Device - BenQ Joybee GP2 User Manual

Connecting to an external memory device

Connecting an SD card
To connect the projector to an SD card:
1. Connect an SD card to the SD card slot on the projector.
• The maximum memory capacity supported for an SD(HC) card is 16 GB. (The maximum
capacity supported for external memory is based on our factory test. Your experience may
differ depending on the manufacturer of the memory device.)
• The projector may not be compatible with some SD cards.
Connecting a USB storage device
To connect the projector to a USB storage device:
1. Plug the USB storage device into the Type A USB socket.
• This product supports USB memory device and HDD (Hard Disk Drive) . Only one and only
last one of partitions will be mounted. (The maximum capacity supported for external
memory is based on our factory test. Your experience may differ depending on the
manufacturer of the memory device.)
• This product does not support multi-card readers.
• This product does not work if the USB storage device is connected by a USB HUB.
• Some products which do not comply with standard USB specifications might not operate
normally.
• A USB storage device with an automatic recognition application or its own driver might not
operate normally.
• A USB storage device that uses only a designated driver might not be recognized.
• Recognition speed for USB storage device may vary by device.
30
Connection
SD CARD
USB flash drive