Hot Dial; Pairing A Gps Device; Music Streaming Via A2Dp; Pairing To An A2Dp Music Player - Cardo Systems G9 User Manual

7.1c HOT dial
Call a pre-programmed phone number automatically at the push
of a button.
1. C onfigure your G9's Hot Dial number via the Cardo Community
at http://community.cardosystems.com. See Section 3 for
more details.
2. T o call your Hot Dial number, tap the Channel "A" and Channel
"B" buttons simultaneously.
7.2 PairiNG a GPs deVice
• Receive GPS navigation instructions
NOTes:
• Not all Bluetooth GPS devices allow connections to Bluetooth
audio devices. Please consult your GPS User Manual for more
information.
• If Pairing is not completed within 2 minutes, the scala rider G9 will
return to Standby mode.
1. Turn on your GPS.
2. V erify that your G9 is turned ON and in Standby mode (single
BLUE flash every 3 seconds).
3. P ress and hold the Volume Up Button for at least 5 seconds,
until the PURPLE light begins flashing rapidly.
4. S earch for Bluetooth device on the GPS device by following the
instructions in the GPS User Manual.
5. O nce your GPS lists the scala rider G9 as a discovered device,
select it.
6. If prompted for a PIN or Passkey, enter 0000 (four zeros).
7. Y our GPS will confirm that pairing has succeeded and the
scala rider G9 will begin flashing slowly in BLUE.
iMPOrTaNT: If you wish to use a mobile phone and GPS device with
the scala rider G9, pair the mobile phone directly to the GPS device.
7.3 MUsic sTreaMiNG Via a2dP
7.3a PairiNG TO aN a2dP MUsic PlaYer
• L isten to Stereo Music via A2DP (non-mobile phone
device)
NOTe: The scala rider G9 can also receive audio via the enclosed
cable from non-Bluetooth MP3 Players or audio sources as
described in section 7.4.
1. T urn on the Music Player and make sure that Bluetooth
function is activated.
2. V erify that the scala rider G9 is turned ON and in Standby
mode (single BLUE flash every 3 seconds).
3. P ress and hold the Mobile Button for at least 6 seconds. The G9
will first flash RED. Continue to hold the button until the RED
and BLUE lights begin rapidly alternating.
4. S earch for Bluetooth device on the Music Player by following
the device's instructions.
5. O nce your Music Player lists the "scala rider G9" as a
discovered device, select it.
6. If prompted for a PIN or Passkey, enter 0000 (four zeros).
7. T he Music Player may confirm that pairing has succeeded, and
the scala rider G9 will begin flashing slowly in BLUE.
| |
scala rider scala rider G9 / G9 PowerSet G9 / G9 PowerSet
® ®
21 21