Selecting The Order Of The Target Devices; Select, Complete The Following Steps; Setting Up A Screen Delay - Fujitsu Siemens Computers s3-1621 User Manual

Figure 14: Menu window
3.9.3.1

Selecting the order of the target devices

Click one of the following buttons:
• Select Name to list the target devices alphabetically by target device name.
-or-
• Select EID to list the target devices numerically by EID number.
-or-
• Select Port to list the target devices numerically by port number.
Click OK.
3.9.3.2

Select, complete the following steps

In the Invoke OSCAR section, select which key combinations you want to use to
start the OSCAR interface, then press your selected combination on the keyboard.
Click OK.
3.9.3.3

Setting up a screen delay

You can set a screen delay so that you can select a target device using the keyboard
without starting the OSCAR interface. A screen delay specifies the length of time that
elapses between when Print Screen is pressed and when the OSCAR interface starts.
Type the number of seconds (0 through 9) to specify the length of time that elapses
between when Print Screen is pressed and when the OSCAR interface starts. If you
specify 0, there is no delay.
Click OK.
590-591-609B
Changing the display behavior
27