Using The 12-Hour On And Off Timer - Sanyo SAP-K77RAX Technical & Service Manual

USING THE 12-HOUR ON AND OFF TIMER

1. TIMER ON mode (Example)
STEP 1
STEP 2
STEP 3
After the length of time set for TIMER ON elapses, the unit
begins operating.
The display depicted above indicates that the air conditioner will
begin operating in three hours.
Setting procedure:
STEP 1 Press the MODE button and set the desired
operation mode.
(See ''Operation with the Remote Control Unit,''
page 9.)
STEP 2 Press the TIMER ON button.
STEP 3 Press the TIMER ON button (which advances the
time displayed) to set the time at which you want
operation to begin.
The time can be set for one to twelve hours, in one
hour steps.
1
• The display changes immediately to its status previous to timer
setting, but the indication remains.
• To check the status of the timer while it is counting down, press
the TIMER ON button again.
Cancellation procedure:Press the CANCEL button.
NOTE
If you do not operate the remote control unit for 25 hours or more
after the start of ON timer operation, the unit will stop operating
automatically as a safety measure in case you forget to turn off the
air conditioner.
2. TIMER OFF mode (Example)
STEP 1
STEP 2
OI-018-11-EG
The timer times
appear in the
display for only
3 seconds.
2 3.......12
The timer times
appear in the
display for only
3 seconds.
After the length of time set for TIMER OFF elapses, the unit
stops operating.
The display depicted at left indicates that the air conditioner will
stop operating in five hours.
Setting procedure:
STEP 1 Press the TIMER OFF button.
STEP 2 Press the TIMER OFF button (which advances the
time displayed) to set the time at which you want
operation to stop.
The time can be set for one to twelve hours, in one
hour steps.
1
• The display changes immediately to its status previous to timer
setting, but the indication remains.
• To check the status of the timer while it is counting down, press
the TIMER OFF button again.
Cancellation procedure: Press the CANCEL button.
3. ON/OFF Program Timer
A combination of the TIMER ON and TIMER OFF modes, this
function allows you to specify the time that the unit turns on and
the time when it turns off.
(Example) The unit will turn on three hours from now, and turn off
five hours from now.
Timer setting
TIMER ON
display during
counting
TIMER OFF
display during
counting after
3 hours has
elapsed
Setting procedure:
STEP 1 Use the procedure described in the ''1. TIMER ON
mode'' section on the preceding page to set the timer
to turn the unit on three hours from now.
STEP 2 Use the procedure described in the ''2. TIMER OFF
mode'' section on the preceding page to set the timer
to turn the unit off five hours from now.
• The display changes immediately to its status previous to timer
setting, but the or
• Press the TIMER ON button or the TIMER OFF button to display
the time remaining on the timer in seconds.
• Note that it is not possible to check both the ON and OFF timer
settings. The timer setting that will occur first is given preference
and displayed.
Cancellation procedure: Press the CANCEL button.
2 3.......12
Stop Operate
3 hours 2 hours
5 hours
indication remains.
11