Remote Control Unit Installation Position - Sanyo SAP-K77RAX Technical & Service Manual

7-3. Remote Control Unit Installation Position

The remote control unit can be operated from either a non-fixed position or a wall-mounted position.
To ensure that the air conditioner operates correctly, do not install the remote control unit in the following places:
In direct sunlight
Behind a curtain or other place where it is covered
More than 8 m away from the air conditioner
In the path of the air conditioner's airstream
Where it may become extremely hot or cold
Where it may be subject to electrical or magnetic interference
Where there is an obstacle between the remote control unit and the air conditioner (since a check signal is sent
from the remote control unit every 5 minutes)
7-3-1. Mounting on a Wall
Before mounting the remote control unit, press the ON/OFF operation button at the mounting location to make sure
that the air conditioner operates from that location. The indoor unit should make a beeping sound to indicate that it
has received the signal.
Insert the remote
control unit from
the top.
Mounting screws 4 16 (included)
To remove the
remote control unit,
slide it upward.
Remote control
* To prevent loss of the remote control unit, you can connect
unit mount
Fig. 7
35
the remote control unit to the mount by passing a string
through the remote control unit and attachment hole.
Rear side
Hole