Sanyo VCC-6570P Instruction Manual page 11

CONNECTIONS
A
3
Connections to the camera Y/C OUT connector
The peripheral devices (VCR, monitor, lens, etc.) and cables are
sold separately.
1
Using a coaxial cable (twin type, 75 ohms), connect the Y/C
OUT connector from the camera to the S-VIDEO input
terminal on the monitor or time lapse VCR.
2
When using this unit, the supplied clamping core A and B must be
installed on the power cord and BNC cable, in order to prevent
electromagnetic interference to the other devices connected.
3
Insert the plug of this power cord into a wall outlet.
Then, turn on the power of all the devices connected to the
camera.
The POWER indicator (A) will light. Adjust the picture on the
monitor using the Brightness and Contrast controls.
(A)
1
2
2
B
CAUTION:
•
Please use a monitor with a Y/C or S-VIDEO input terminal, or a
time lapse VCR with a S-VIDEO input terminal.
• Use a Mini-DIN (round type, 4-pin) plug to connect to the Y/C
connector.
Never use a coaxial cable longer that 10 metres to connect the
camera to the S-VIDEO input terminal.
(Video signal connections)
: VIDEO IN
: VIDEO OUT
10
English