Statistics - LevelOne MIMO WPC-0500 User Manual

Parameter
Status
Extra Info
Channel
Link Speed (Mbps)
Throughput (Kbps)
Link Quality
dBm
Signal Strength
Signal Strength2
Noise Level
3.4

Statistics

This option enables you to view the statistic information of the connection including transmit statistics
and receive statistics. You may reset the counters by clicking "Reset Counter".
Description
Display the SSID and MAC ID of the network the card is
connecting to.
Display the link status.
Display the number of the radio channel and the frequency used
for the networking.
Display the transmission and reception rate of the network. The
maximum transmission rate is 54Mbps.
Display the speed of data transmitted and received.
This bar indicates the quality of the link. The higher the
percentage, the better the quality.
If you want to know the signal strength in the unit of dBm, select
this check box.
This bar shows the signal strength level. The higher percentage
shown in the bar, the more radio signal been received by the card.
This indicator helps to find the proper position of the wireless
device for quality network operation.
This card has two antennas for receiving. The "Signal Strength2"
indicates the receiving signal strength for the second antenna.
Display the noise level in the wireless environment.
22