Mitsubishi WD-52627 Training Manual page 27

Engine replacement instructions are included in the applicable service manuals as
well as being included with the replacement part when it is shipped.
ENGINE DATA COPY (V29/30/31 Only)
After engine has been installed the engine data
needs to be copied to the chassis.
Press MENU + 2457 + 0
Press ENTER to select copy light engine
EEPROM to DM
ENGINE SHIPPING PREP
From replacement engine:
Remove Lens Cap and install to
original engine.
Remove 2 protective foam
pieces and install to original
engine for shipping.
V28 engine picutred. V29-V31
engines also require lens cap but
do not have protective foam.
V28 ENGINE SHUTTER (Contrast control system)
LCD engine has a contrast control shutter unit. If this unit is not
functioning the TV may not turn on. Error code can report "5-6",
you may want to check CN5.
Lens Cap
2-3
2 Protective Foam pieces