HP Pavilion F50 User Manual page 14

hp pavilion f50/f70 LCD Monitor
S e t t i n g U p t h e M o n i t o r
Connecting the cables to the f70 monitor
Look at the following diagram and follow the steps listed below to
connect the cables to the f70 17-inch LCD monitor.
CAUTION:
This monitor is equipped with an auto-sensing
power supply for voltage ranges 100—240 V~,
50/60 Hz. Use the monitor with the supplied DC
adapter only.
Microphone
(pink)
Audio out
(green)
To connect the cables to the f70 monitor:
1 Make sure the computer is turned off.
2 Plug the video cable into the correct video connector (VGA or
DVI-D) on the back of the monitor and into the corresponding video
connector on the computer. Secure the cable by tightening the
thumbscrews.
VGA cable
DVI-D cable
14 English
Video cable
(VGA)
Power
source
→
→
DC In
cable
Volume
control
Audio
cable
with attached DC cable
VGA connector
DVI-D connector
Video
connectors
VGA
DVI
DC adapter
Power
cord
X