Setting Up The Monitor; Preparing The Stand; Connecting Your Monitor - Dell S2240T User Manual

2

Preparing the Stand

NOTE: The stand is attached when the monitor is shipped from the factory.
a. Place the monitor on a soft cloth or cushion.
b. Pull the monitor stand arm upwards clear of the monitor.
c. Place the monitor upright.

Connecting Your Monitor

WARNING: Before you begin any of the procedures in this section, follow the
Safety Instructions.
NOTE: The VGA/DVI cable can be purchased separately.
NOTE: Do not connect all cables to the computer at the same time.
To connect your monitor to the computer:
1. Turn off your computer and disconnect the power cable.
Connect the HDMI/DVI/VGA cable from your monitor to the computer.

Setting Up the Monitor

Setting Up the Monitor
21
|