Dell S2240T User Manual page 32

Auto Adjust
Input Source
Auto Select
VGA
DVI-D
HDMI
32
| Operating the Monitor
Even though your computer recognizes your monitor on startup, the
Auto Adjustment function optimizes the display settings for use with
your particular setup.
Auto Adjustment allows the monitor to self-adjust to the incoming
video signal. After using Auto Adjustment, you can further tune your
monitor by using the Pixel Clock (Coarse) and Phase (Fine) controls
under Display Settings.
NOTE:
In most cases, Auto Adjust produces the best image for your
configuration.
NOTE:
Auto Adjust option is only available when you are using the
analog (VGA) connector.
Use the Input Source menu to select between the different video
signals that may be connected to your monitor.
Press to select Auto Select, the monitor scans for available input
sources.
Select the VGA input when you are using the analog (VGA) connector.
Press to select the VGA input source.
Select the DVI-D input when you are using the Digital (DVI) connector.
Press to select the DVI input source.
Select the HDMI input when you are using the HDMI connector. Press
to select the HDMI input source.