Dell 3008WFP User Manual page 21

Hue This feature can make color shift of video image to green or purple. This is used to adjust for desired flesh tone color.
Use
makes video image shade into greenish
makes video image shade into purplish
NOTE:
Saturation This feature can adjust the color saturation of the video image.
Use
makes video image looks more monochrome
makes video image looks more colorful
NOTE:
Color Reset Reset your monitor color settings to the factory settings.
Exit Menu
Push
DISPLAY
SETTINGS
Display
setting mode
submenu for
VGA/DVI-D
input
Display
setting mode
Video input
NOTE:
Back
Push
Wide Mode Adjust the image ratio as 1:1, aspect or full screen.
Horizontal Po
Use the
sition
NOTE: When using DVI source, the Horizontal Position setting is not available.
Vertical Posit
Use the
ion NOTE: When using DVI source, the Vertical Position setting is not available.
Sharpness This feature can make the image look sharper or softer.
Use
Pixel Clock The Pixel Clock and Phase adjustments allow you to adjust your monitor to your preference. These settings are accessed through the
main OSD menu, by selecting 'Display Settings'.
Use the
If satisfactory results are not obtained using the Phase adjustment, use the Pixel Clock (coarse) adjustment and then use Phase
Phase
(fine), again.
NOTE:
Dynamic The Dynamic Contrast adjustment helps get a higher contrast if you choose Game preset, Movie Preset, Sports Preset and Nature
Contrast Preset. (Brightness control is disabled while in Dynamic Contrast mode and will be grayed out.)
Use the
Use the
Display Info All the settings related to this monitor.
and buttons to adjust the hue from '0' to '100'.
Hue adjustment only available for video input.
and buttons to adjust the saturation from '0' to '100'.
Saturation adjustment only available for video input.
to exit the OSD main menu.
VGA/DVI-D input
Display Settings modes are different between the VGA/DVI-D and Video inputs.
to go back to the main menu.
and buttons to adjust image left and right. Minimum is '0' (-). Maximum is '100' (+).
and buttons to adjust image up and down. Minimum is '0' (-). Maximum is '100' (+).
and buttons to adjust the sharpness from '0' to '100'.
and buttons to adjust for best image quality.
Pixel Clock and Phase Adjustments are only available for "VGA" input.
button to enable the Dynamic Contrast adjustment.
button to disable the Dynamic Contrast adjustment.
or
Video input