Marantz Remote App - Marantz NR1604 Owner's Manual

Contents
Remotely control a Marantz Blu-ray Disc
player by the Marantz Remote App
Marantz Blu-ray Disc player of newer generation also can be controlled
via a network receiver unit using the Marantz Remote App. Please ensure
REMOTE CONTROL system of the receiver unit and the Blu-ray Disc
player is set up as shown in the previous section.
Front panel Display
Connections Playback
Rear panel
Settings
DC OUT jack
When a device with DC IN jack is connected, the connected device's
power on/standby can be controlled through linked operation to this unit.
The DC OUT jack outputs a maximum 12 V/150 mA electrical signal.
12 V/150 mA trigger-compatible device
NOTE
• Use the monaural mini-plug cable for connecting DC OUT jacks. Do not use the
stereo mini-plug cable.
• If the permissible trigger input level for the connected device is larger than 12
V/150 mA, or has shorted, the DC OUT jack cannot be used. In this case, turn off
the power to the unit, and disconnect it.
46
Remote
Tips Appendix
Index