Marantz NR1604 Owner's Manual page 206

Contents Connections Playback Tips Appendix
Settings
z1 This item can be selected when a Dolby TrueHD signal is played.
z2 This item can be selected when a Dolby Digital or DTS signal is played.
z3 This item can be selected when a Dolby Digital or DTS signal or DVD-Audio is played.
z4 This setting is available when the set sound mode name contains "+PLgz".
z5 During playback in PURE DIRECT mode, the surround parameters are the same as in DIRECT mode.
z6 This setting is available when "Subwoofer Mode" (vpage 166) in the menu is set to "LFE+Main".
z7 This item cannot be set when "Dynamic EQ" (vpage 139) is set to "On".
z8 This item cannot be set when Audyssey® Setup (Speaker Calibration) has not been performed.
z9 This item cannot be set when "MultEQ®" (vpage 139) is set to "Off" or "Graphic EQ".
z10 This item can be set when the input signal is analog, PCM 48 kHz or 44.1 kHz.
206
Front panel Display Rear panel Remote Index