Table of Contents
Advertisement
13. MISCELLANEOUS FUNCTIONS and SETTINGS
Disk Event
The DVR may be configured to emit an audible speaker beep and display a message when no
disk is present, a disk error occurs or the disk is full.
To configure from Main Menu click the Alarm icon followed by the Disk Event icon. A Disk Event
settings screen similar to the one below will appear.
a. EVENT TYPE – From the drop-down menu select No Disk, Disk Error or No Disk Space.
b. ENABLE – To enable the function highlight the ENABLE checkbox.
c. SHOW MESSAGE and BUZZER – To notify the user of the abnormal event highlight the
desired checkboxes to display a message and/or activate a buzzer.
d. When done click the SAVE button.
Color Settings
For each channel display window it is possible to customize the color, brightness, contrast,
saturation, hue and gain settings. Further, these settings can be set fixed or set for two
user-defined time periods. This can be used, for example, to make an image less bright during
daylight and brighter with more contrast at night.
Position the mouse cursor in the desired channel display window and click the right mouse
button to call up the Short-cut Menu. From the menu select Color Setting. The Color Setting
screen similar to the one below will appear.
v2.0 11/8/11
60
Advertisement
Table of Contents
