Table of Contents
Advertisement
a. CHANNEL TITLE – Click the SET button to modify the channel title. Use the mouse
cursor, left mouse button and soft keyboards to change the title.
b. TIME DISPLAY – Highlight the checkbox if the system time is to be displayed.
c. CHANNEL TITLE – Highlight the checkbox if the channel title is to be displayed.
d. RECORDING STATUS – Highlight the checkbox if the recording status is to be displayed.
e. ALARM STATUS – Highlight the checkbox if the alarm status is to be displayed.
f.
TRANSPARENCY – Using the slider set the level of GUI transparency over the
background image. Range is 128 to 255.
g. RESOLUTION – Using the drop-down menu select one of five display resolutions.
h. CHANNEL – Using the drop-down menu select the set code output channel number (i.e.,
camera/DVR channel)
i.
REGION COVER – If desired, a region in the camera's image can be blacked out.
Highlight the Region Cover checkbox, click SET, then place and adjust the black out area
using the mouse. When done click the right mouse button and select UpWindow to return
to the GUI Display setting screen. Finally, highlight the corresponding channel window.
j.
TIME DISPLAY, CHANNEL TITLE – The time display and/or the channel title can be
repositioned. Highlight the appropriate checkbox the click SET. Left click the mouse
button and drag the time display/channel title to the desired location. When done, click the
right mouse button and select UpWindow to return to the GUI Display setting screen.
PTZ Configuration Settings
See Section 9: PTZ Control.
Tour (Screen Sequencing) Settings
Each channel window can be displayed as a single window, one of four windows, one of nine
windows or one of sixteen windows. Further, by highlighting the ENABLE TOUR checkbox each
channel window can be sequenced according to a desired time interval.
From Main Menu click the System icon followed by the Tour icon. A Tour settings screen similar
to the one below will appear.
v2.0 11/8/11
50
Advertisement
Table of Contents
