Table of Contents
Advertisement
d. SENSITIVITY – Select from the six levels of motion sensitivity from the drop-down
menu.
e. REGION – The viewable area where the camera is to detect motion and the DVR is to
record. By setting a region it is possible to reduce intermittent and/or low priority
events that could trigger motion detection (e.g., a ceiling fan, a breeze moving
curtains). To define the motion detection region:
Click SET. This will present a display similar to the one below. The red blocks
represent the area where motion will be detected and recorded. The non-colored
boxes represent areas that will not trigger motion detection.
To adjust the motion detection region position the mouse cursor on a block, click
the right mouse button and drag the mouse over the area to be defined. Use the
left mouse button to de-select.
Right click the mouse button and select UpWindow from the pop-up menu and
return to the Motion Detection setup screen.
f.
PERIOD – To set the day and time period for the motion detection function to take
place click SET and a screen similar to the one below will appear:
Select the desired day from the drop-down menu or ALL for the entire week. Four
possible time slots are available for each day. Use the mouse and soft keyboard to
v2.0 11/8/11
21
Advertisement
Table of Contents
