Led Indication Table - JBL Authentics L8 Owner's Manual

Authentics L8
If a new version is available, download it from the JBl website
and proceed with the following upgrade method:
1. place the upgrade file downloaded from the website,
www.jbl.com onto the root directory of a usB drive.
2. Insert the usB drive into the top usB port on the
top panel (labeled ipad).
3. press the power and source buttons
simultaneously for five seconds. the system will
automatically begin the upgrade process.
NOTE: The upgrade process normally takes up to
30 minutes to complete. Do not attempt to operate
or remove power from the system during the
upgrade process.
If the upgrade process has not completed after 1 hour,
restart the system by removing and reconnecting AC
power, then begin the upgrade process again.

LED Indication Table

LED
power led
Bluetooth led
airplay led
dlna led
aux-in led
Optical led
Volume leds
all leds
wireless charging
State
white, constant
amber, constant
Off
white, constant
white, regular Flash
white, On
white, On
white, constant
white, constant
white, constant
Flash five times
white, On
white, Breathing
white, Quick Flash
Factory Setting Reset
to restore all settings to the factory defaults, press and hold the
power button for at least 10 seconds. the following settings
will be reset:
• source
• Volume settings
• eQ settings
• airplay name
• wi-Fi settings
Operational mode
sleep mode
OFF/standby mode
Bluetooth connected
Bluetooth disconnected and pairing mode
airplay source active, wi-Fi info sharing
dlna source active, wi-Fi Manual connect mode
aux-in source active
Optical source active
Volume level
Factory settings restored
charging device recognition
charging
error indicator
led Indication table
Indication
13