LG GCC-4320B Owner's Manual page 12

DirectCD TM v2.5b(s)
To Install as a
Slave Drive
Connecting
the Power
Connector
Installation
To install the drive as a Slave, change the jumper setting on the rear
panel to SL.
Master drive
(Booting hard disk)
Primary connector
Connect the power cable from the computer's power supply to the socket
on the drive unit, fitting the connector firmly into the power in connector.
If there is no spare power cable available in the computer, you will have
to purchase a splitter cable of a suitable type.
Beveled edge up
NOTE : Improper connection may damage the drive and void the
warranty. Generally, the power connector can only fit one way.
9
- OR -
+5
Master drive
(Booting hard disk)
Slave drive
(CD-RW/DVD-ROM
drive)
(Jumper set to
SLave)
Master drive
(Other IDE drive)
Slave drive
(CD-RW/DVD-ROM
drive)
(Jumper set to
SLave)
Secondary
connector
POWER
GND +12