Sanyo PLC-XL40 Owner's Manual page 48

Setting
Enter a PIN code
Use the Point
7 8
the SELECT button to fix the number; the number
changes to "✳." If you fixed an incorrect number, move
the pointer to "Set" or "Clear" once by pressing the
Point d button, then return to "PIN code." Enter the
correct number.
Repeat this step to complete entering a four-digit
number.
When the four-digit number is fixed, the pointer
automatically moves to "Set." Press the SELECT button
so that you can change the following PIN code lock
settings.
If you entered an incorrect PIN code, "PIN code" and
the number (✳✳✳✳) turn red and disappear. Enter the
PIN code all over again.
Change the PIN code lock setting
Select Off, On1, or On2 with the Point
then move the red frame pointer to "Quit" with the
Point d button. Press the SELECT button to close the
dialog box.
Change the PIN code
The PIN code can be changed to your desired four-digit
number.
Select "PIN code change" with the Point
press the SELECT button to display the New PIN code
input dialog box.
Select a number with the Point
number with the SELECT button. Repeat it to complete
entering a four-digit number. When the four-digit number
is fixed, the pointer automatically moves to "Set." Then
press the SELECT button.
CAUTION:
WHEN YOU HAVE CHANGED THE PIN CODE, TAKE
A MEMO AND KEEP IT SECURELY. IF YOU FORGET
YOUR PIN CODE, THE PROJECTOR CAN NO
LONGER BE STARTED.
Alarm
This function allows you to configure the Alarm
operation. See pages 50–52 for the Antitheft alarm
function.
48
buttons to select a number and press
buttons and
7 8
d
7 8 buttons and fix the
Enter a PIN code
Quit
Change the PIN code lock setting
button, and
Change the PIN code
Pointer
The input numbers change
to "✳" for security reasons.
When the pointer automatically
moves to "Set," press the
SELECT button.
Select a desired
setting with the
Point 7 8 buttons.
Select PIN code change and
press the SELECT button.
The New PIN code input
dialog box appears.
The entered numbers are
displayed for confirmation.