Playing An Iphone And Ipod With The Usb Cable Connected - Denon COCOON DSD-501 Owner's Manual

Operations possible during playback
Adjusting the tone (LOUDNESS)
LOUDNESS
When you press on the main unit to the "On" (h) state,
bass and treble sounds, which are hard to hear at a low volume level,
are enhanced for a more natural audio quality.
LOUDNESS
Press on the main unit.
" " appears on the display.
AC IN
NETWORK WIRELESS LAN LOUDNESS
AUX IN NETLINK WPS
• Press the button again to the "Off" (j) state to return to the
original audio quality.
Last function memory
This function stores the settings (Input source, Volume level and
setting value of each menus) which were made before going into the
standby mode.
When the power is turned back on, the settings are restored.

Playing an iPhone and iPod with the USB cable connected

With this unit, you can listen to music on an iPhone or iPod. It is also
possible to operate the iPhone or iPod from the main unit or remote
control.
Connect the iPhone or iPod to this unit
"Connecting an iPhone or iPod").
When the iPhone or iPod is connected to this unit, the input source
automatically switches to "iPod".
• During AirPlay, the input source does not switch automatically.
Press to switch the input source to "iPod".
ON / STANDBY
NOTE
This function is activated around 30 seconds after the power is turned
on.
n Remote control and iPhone or iPod button
relations
Remote control iPhone or
buttons iPod buttons
13
6
8 9
,
(Press and
(Press and release)
8 9 6
,
(Press and hold) (Press and hold)
(vpage 6
Operation on this unit
1 3 Play the track / Pause the track.
or
7
,
Play the track from the beginning/
Play the next track.
release)
7 Fast-reverse the track/
,
Fast-forward the track.
12
n Disconnecting an iPhone or iPod
1
Press X to set the standby mode.
2
Disconnect the USB cable from
the USB port of this unit.
NOTE
• Depending on the type of iPhone or iPod and the software version,
some functions may not operate.
• Note that Denon will accept no responsibility whatsoever for any
problems arising with the data on an iPhone or iPod when using this
unit in conjunction with the iPhone or iPod.