Table of Contents
Advertisement
When an IEEE 802.3af Power over Ethernet device is installed the system
administrator only has to use a single RJ-45 Ethernet cable to carry both
power and data signals to each device.
Model List
The PoE Media Converter model is:
•
MC100FX-TX-PoE: with on board SC/Multi-mode fiber connector, up to
2km
Media Converter Features
•
Complies with the IEEE 802.3, IEEE 802.3u 10/100Base-TX, 100Base-FX,
IEEE 802.3af Power Over Ethernet standard
•
Auto-Negotiation for 10/100Base-TX Half-Duplex or 10/100Base-Full-
Duplex
•
Compact in size, easy installation
•
100Base-FX interface for up to 2km (multi-mode fiber 50μm/125μm) on
MC100FX-TX-POE
•
LED indicators for easy network troubleshooting
•
48V/0.4A DC power supply (NOT SUPPLIED)
•
Layer 2 Features:
•
IEEE 802.3x Full-duplex flow-control, back-pressure in half-duplex
eliminate packets loss
•
Support Maximum frame size to 1600bytes
•
Support auto MDI/MDI-X function
•
Store-and-Forward mechanism
•
Auto Loop Back Test function
•
Side DIP-switch: with LFP (Link Fault Pass-through) mode selection
MC100FX-TX-PoE Media Converter User Manual
Chapter 1: Introduction
3
Advertisement
Table of Contents
