Table of Contents
Advertisement
Chapter 2: Hardware Installation
6.
Turn on the power of the device, the TX Link and FX Link LEDs should
light when all cables are attached.
Figure 7: Connection diagram
NOTE:
An RJ-45/STP, UTP Cat 5, straight/crossover cable is accepted.
Please refer to the Specification chapter for more about the wiring distance
of your TP, Optic-fiber networks.
PoE functions
The MC100FX-TX-PoE and the IEEE 802.3af Injector/Splitter installation:
Before installation, we recommend that you verify your network environment.
If there are any IEEE 802.3af devices that need power, then the MC100FX-TX-
PoE can provide power for this Ethernet device. The MC100FX-TX-PoE can
use an AC-DC adapter (not supplied) with DC 48V input and injects this DC
power into the pin of the twisted pair cable (pair 1, 2 and pair 3, 6).
NOTE:
This product is intended to be supplied by a UL Listed Direct Plug-In
Power Unit marked "Class 2" or "LPS" and output rated 48 VDC, 380 mA
minimum.
If it is very difficult to find a power socket for AC-DC Adapter for your non-
IEEE 802.3af networked device, the MC100FX-TX-PoE and SP-PoE can provide
you a way to supply DC power for these Ethernet devices conveniently and
easily.
10
MC100FX-TX-PoE Media Converter User Manual
Advertisement
Table of Contents
